Owners manual

8: Devices
SLC™ Console Manager User Guide 94
SLP Commands
2. Click the Apply button.
Device Port – Sensorsoft Device
Devices made by Sensorsoft are used to monitor environmental conditions.
To access the Sensorsoft device:
1. In the Connected to field above the IP Settings section of the Device Ports – Settings page,
select Sensorsoft.
2. Click the Device Commands link. Figure 8-7 shows the page that displays.
Environmental
Status
Click the link to view the environmental status (e.g., temperature and humidity) of
the SLP power manager.
Infeed Status Click the link to view the status of the data the SLP power manager is receiving.
System Info Click the link to see system information pertaining to the SLP power manager.
Restart SLP To restart the SLP power manager, select the checkbox.
Control Outlet For Tower A or Tower B, select All Outlets or Single Outlet and the number of
the outlet to be controlled (1-8 for the SLP8 or 1-16 for the SLP16) and select the
command for the outlet (No Action, Power On, Power Off, Cycle Power). No
Action is the default.