Owners manual

7: Services
SLC™ Console Manager User Guide 75
2. Enter the following fields.
3. Click the Apply button.
To view or terminate web sessions:
1. Click the Web Sessions link. Figure 7-9 shows the page that displays.
Figure 7-9 Web Server - Web Sessions Page
2. To terminate, click the check box in the row of the session you want to terminate.
3. To return to the Web Server page, click the link.
To view import, or reset the SSL Certificate:
1. Click the SSL Certificate link. Figure 7-10 shows the page that displays.
Timeout Select the number of minutes (5-120) after which the SLC web session times out. The
default is 5. To avoid timeouts, select No. If the session times out, refresh the browser
page and enter your user ID and password to open another web session.
Note: If you close the browser without logging off the SLC console manager first, you
will have to wait for the timeout time to expire. You can also end a web session by using
the admin web terminate command at the CLI or by asking your system administrator to
terminate your active web session.
Enable
iGoogle
Gadget Web
Content
Click the check box to enable an SLC iGoogle gadget. The iGoogle gadget allows an
iGoogle user to view the port status of many SLC console managers on one web page.
See Google Gadgets on page 77 for more information regarding the XML code.
Allow SSLv2
Protocol
Click the checkbox to support SSLv2 protocol. By default, the web supports the SSLv3/
TLSv1 protocol. Changing this option requires a reboot for the change to take effect.
Cipher Click one of the radio buttons to configure the web to support low security (less than
128 bits) or High/Medium security (128 bits or higher) for the cipher. By default, the web
uses High/Medium. Changing this option requires a reboot for the change to take effect.