Owners manual

7: Services
SLC™ Console Manager User Guide 72
2. Enter the following fields.
3. If you entered an IP address, click the Add IP Address button. The IP address displays in the
IP Address List.
4. Repeat steps 2 and 3 for each IP address you want to add.
5. To delete an IP address from the IP Address List, select the address and click the Delete IP
Address button.
6. Click the Apply button. When the confirmation message displays, click Secure Lantronix
Network on the main menu. The Secure Lantronix Network page displays the SLC devices
resulting from the search. You can now manage these devices.
Secure Lantronix Network Commands
The following CLI commands correspond to the Secure Lantronix Network page. For more
information, see 15: Command Reference.
 set slcnetwork (on page 254)
 show slcnetwork (on page 254)
Date and Time
You can specify the current date, time, and time zone at the SLC location (default), or specify NTP
to synchronize with other NTP devices on your network.
To set the local date, time, and time zone or enable NTP:
1. From the main menu, select Date & Time. Figure 7-7 shows the page that displays.
Secure Lantronix
Network Search
Select the type of search you want to conduct.
Local Subnet: Performs a broadcast to detect SLC devices on the local subnet.
Manually Entered IP Address List: Provides a list of IP addresses that may not
respond to a broadcast because of how the network is configured.
The default is Both.
IP Address If you selected Manually Entered IP Address List or Both, enter the IP address
of the SLC device you want to find and manage.