Manualshelf

Owners manual

ManualsBrandsLantronix ManualsComputers & LaptopsSLC 8000 Advanced Console Manager, RJ45 32-Port, AC-Dual Supply - 2 x Network (RJ-45) - 2 x USB - 32 x Serial Port - G
61626364656667686970
7: Services
SLC™ Console Manager User Guide 67
V3 Read-Only User
V3 Read-Write User
3. Click the Apply button.
SNMP Commands
The following CLI commands correspond to the SNMP page. For more information, see 15:
Command Reference.
set services (on page 252)
set services trapenable (on page 253)
NFS and SMB/CIFS
If you want to save configuration and logging data to a remote NFS server, access the NFS &
Server Message Block/Common Internet File System (SMB/CIFS) page. You can also export
configuration and logging data by means of an exported CIFS share.
Mounting an NFS shared directory on a remote network server onto a local SLC directory enables
the SLC console manager to store device port logging data on that network server. This
configuration avoids possible limitations in the amount of disk space on the SLC device available
for logging files. You may also save SLC configurations on the network server.
Similarly use SMB/CIFS, Microsoft file-sharing protocol, to export a directory on the SLC console
manager as an SMB/CIFS share. The SLC device exports a single read-write CIFS share called
“public,” with two subdirectories:
Encrypt with Encryption standard to use:
DES: Data Encryption Standard (default)
AES: Advanced Encryption Standard
User Name SNMP v3 is secure and requires user-based authorization to access SLC MIB
objects. Enter a user ID. The default is snmpuser. Up to 20 characters.
Password/Retype
Password
Password for a user with read-only authority to use to access SNMP v3. The
default is SNMPPASS. Up to 20 characters.
Passphrase/
Retype
Passphrase
Passphrase associated with the password for a user with read-only authority. Up
to 20 characters.
User Name SNMP v3 is secure and requires user-based authorization to access SLC MIB
objects. Enter a user ID for users with read-write authority. The default is
snmprwuser. Up to 20 characters.
Password/Retype
Password
Password for the user with read-write authority to use to access SNMP v3. The
default is SNMPRWPASS. Up to 20 characters.
Passphrase/
Retype
Passphrase
Passphrase associated with the password for a user with read-write authority. Up
to 20 characters.