Owners manual

7: Services
SLC™ Console Manager User Guide 64
Audit Log
Web SSH/Web Telnet
SMTP
Phone Home
3. To save, click the Apply button.
SSH, Telnet, and Logging Commands
The following CLI commands correspond to the SSH/Telnet/Logging page. For more information,
see 15: Command Reference.
 set services (on page 252)
 set services trapenable (on page 253)
 show services (on page 253)
Enable Log Select to save a history of all configuration changes in a circular log. Disabled by
default. The audit log is saved through SLC reboots.
Size Set the maximum size of a log from 1 to 500 Kbytes. The default maximum size of
a log is 50 Kbytes (approximately 500 entries).
Include CLI
Commands
Select to cause the audit log to include the CLI commands that have been
executed. Disabled by default.
Include In System
Log
Enable to include the audit log contents in the system log (under the General/Info
category/level). Disabled by default.
Java Terminal
Deployment
Method used to launch Java applications, either Java Web Start or Applet.
Java Terminal
Buffer Size
Number of lines in the Java terminal window that are available for scrolling back
through output. The valid range is 24 to 5000 and the default is 250.
Server IP address of your network’s Simple Mail Transfer Protocol (SMTP) relay server.
Sender The email address of the sender of outgoing emails. The strings “$host” and
“$domain” can be part of the email address - they will be substituted with the
actual hostname and domain. The default is donotreply@$host.$domain.
Enable If enabled, the SLC console manager will attempt to phone home every hour until
it has contacted a Lantronix SLM™ management appliance and provided it with its
configuration.
IP Address IP address of the SLM management appliance.
Last Attempt
(view only)
Date and time of last connection attempt.
Results
(view only)
Indicates whether the attempt was successful.