Owners manual

15: Command Reference
SLC™ Console Manager User Guide 225
slmtime <Time Frame>
sshauth <enable|disable>
sshin <enable|disable>
sshport <TCP Port>
sshtimeout <disable|1-1800 seconds>
stopbits <1|2>
sysloglogging <enable|disable>
tcpauth <enable|disable>
tcpin <enable|disable>
tcpport <TCP Port>
tcptimeout <disable|1-1800 seconds>
telnetauth <enable|disable>
telnetin <enable|disable>
telnetport <TCP Port>
telnettimeout <disable|1-1800 sec>
timeoutlogins <disable|1-30 minutes>
usblogging <enable|disable>
usbmaxfiles <Max # of Files>
usbmaxsize <Size in Bytes>
usbport <U1>
viewportlog <enable|disable>
webcolumns <Web SSH/Telnet Cols>
webrows <Web SSH/Telnet Rows>
Note: A group of device ports can be configured by specifying a comma-separated list of
ports (i.e., '1-4,8,10-12') or 'ALL'. Remove breakseq for Device Ports connected to raw
binary connections. The logging level for the Device Ports log must be set to 'Info' to view
Syslog entries for Device Port logging. To send commands to devices such as SLP power
manager and Sensorsoft, see the help for 'set command'.
Description
Configures a single port or a group of ports.
set deviceport global
Syntax
set deviceport global <one or more parameters>
Parameters
sshport <TCP Port>
telnetport <TCP Port>
tcpport <TCP Port>