Owners manual

15: Command Reference
SLC™ Console Manager User Guide 222
localserver3 <IP Address or Name>
poll <local|public>
publicserver <IP Address or Name>
state <enable|disable>
sync <broadcast|poll>
Description
Synchronizes the SLC console manager with a remote time server using NTP.
show ntp
Syntax
show ntp
Description
Displays NTP settings.
Device Commands
set command
Syntax
set command <Device Port # or Name or List> <one or more parameters>
Parameters
slp auth login <User Login>
slp restart
slp outletcontrol state <on|off|cyclepower> [outlet <Outlet
#>][tower <A|B>] (Outlet # is 1-8 for SLP8 and 1-16 for SLP16. The
outletcontrol parameters control individual outlets.)
slp outletstate [outlet <Outlet #>] [tower <A | B>]
slp envmon
slp infeedstatus
slp system
sensorsoft degrees <celsius | fahrenheit>
sensorsoft lowtemp <Low Temperature in C.>
sensorsoft hightemp <High Temperature in C.>
sensorsoft lowhumidity <Low Humidity%>
sensorsoft highhumidity <High Humidity%>
sensorsoft traps <enable|disable>
sensorsoft status