Owners manual

15: Command Reference
SLC™ Console Manager User Guide 218
connect unidirection
Syntax
connect unidirection <Device Port # or Name> dataflow
<toendpoint|fromendpoint> <endpoint> <one or more parameters>
<endpoint> is one of:
deviceport <Device Port # or Name>
telnet <IP Address or Name> [port <TCP Port>]
ssh <IP Address or Name> [port <TCP Port>] [<SSH flags>]
tcp <IP Address> port <TCP Port>
udp <IP Address> port <UDP Port>
<SSH flags> is one or more of:
user <Login Name>
version <1|2>
command <Command to Execute>
Parameters
exclusive <enable|disable>
trigger <now|datetime|chars>
date <MMDDYYhhmm[ss]>
charcount <# of Chars>
charseq <Char Sequence>
Note: If the trigger is datetime (establish connection at a specified date/time), enter the
date parameter. If the trigger is chars (establish connection on receipt of a specified
number or characters or a character sequence), enter either the charcount or the charseq
parameter.
Description
Connects a device port to another device port or an outbound network connection (data flows in
one direction).
show connections
Syntax
show connections [email <Email Address>]
Description
Displays connections and their IDs. You can optionally email the displayed information. The
connection IDs are in the left column of the resulting table. The connection ID associated with a
particular connection may change if the connection times out and is restarted.
show connections connid
Syntax
show connections connid <Connection ID> [email <Email Address>]