Owners manual

15: Command Reference
SLC™ Console Manager User Guide 216
Connection Commands
connect bidirection
Syntax
connect bidirection <Device Port # or Name> <endpoint> <one or more
parameters>
<endpoint> is one of:
deviceport <Device Port # or Name>
telnet <IP Address or Name> [port <TCP Port>]
ssh <IP Address or Name> [port <TCP Port>] [<SSH flags>]
tcp <IP Address> port <TCP Port>
udp <IP Address> [port <UDP Port>]
Parameters
exclusive <enable|disable>
trigger <now|datetime|chars>
date <MMDDYYhhmm[ss]>
charcount <# of Chars>
charseq <Char Sequence>
charxfer <toendpoint|fromendpoint>
<SSH flags> is one or more of:
user <Login Name>
version <1|2>
command <Command to Execute>
Note: If the trigger is datetime (establish connection at a specified date/time), enter the
date parameter. If the trigger is chars (establish connection on receipt of a specified
number or characters or a character sequence), enter the charxfer parameter and either
the charcount or the charseq parameter.
connect direct
Syntax
connect direct <endpoint>
Parameters
deviceport <Device Port # or Name>
hostlist <Host List>
ssh <IP Address or Name> [port <TCP Port>][<SSH flags>]
tcp <IP Address> [port <TCP Port>]
telnet <IP Address or Name> [port <TCP Port>]
udp <IP Address> [port <UDP Port>
<SSH flags> is one or more of:
user <Login Name>