Owners manual

15: Command Reference
SLC™ Console Manager User Guide 205
 To clear an IP address, type 0.0.0.0, or to clear a non-IP address value, type CLEAR.
 When the number of lines displayed by a command exceeds the size of the window (the
default is 25), the command output is halted until you are ready to continue. To display the
next line, press Enter, and to display the page, press the space bar. You can override the
number of lines (or disable the feature altogether) with set cli.
Deprecated Commands
Deprecated commands in this release are as follows:
 set locallog (replaced by set log clear (on page 238))
 show locallog (replaced by show log local (on page 239))
Administrative Commands
admin banner login
Syntax
admin banner login <Banner Text>
Description
Configures the banner displayed after the user logs in.
Note: To go to the next line, type \n and press Enter.
admin banner logout
Syntax
admin banner logout <Banner Text>
Description
Configures the banner displayed after the user logs out.
Note: To go to the next line, type \n and press Enter.
admin banner show
Syntax
admin banner show
Description
Displays the welcome, login and logout banners.
admin banner ssh
Syntax
admin banner ssh <Banner Text>