Owners manual

15: Command Reference

SLC™ Console Manager User Guide 204

 <value> User must specify an appropriate value, for example, an IP address. The

parameter values are in mixed case. Square brackets [ ] indicate optional

parameters.

Command Line Actions and Categories

Table 15-1 lists the actions and categories for each action.

1 USB commands are only accessible on SLC USB part number -03.

For general help and to display the commands to which you have rights, type help. For general

command line help, type help <command line>. For more information about a specific command,

type help followed by the command. For example, help set network or help admin firmware.

Tips

 Type enough characters to identify the action, category, or parameter name uniquely. For

parameter values, type the entire value. For example, you can shorten: set network port 1

state static ipaddr 122.3.10.1 mask 255.255.0.0 to se net po 1 st static ip 122.3.10.1 ma

255.255.0.0.

 Use the Tab key to automatically complete action, category, or parameter names. Type a

partial name and press Tab either to complete the name if only one is possible, or to display

the possible names if more than one is possible. Following a space after the preceding name,

Tab displays all possible names.

 Should you make a mistake while typing, backspace by pressing the Backspace key and/or

the Delete key, depending on how you accessed the interface. Both keys work if you use

VT100 emulation in your terminal access program when connecting to the console port. Use

the left and right arrow keys to move within a command.

 Use the up and down arrows to scroll through previously entered commands. If desired,

select one and edit it. You can scroll through up to 100 previous commands entered in the

session.

Table 15-1 Actions and Category Options

Action Category

| user

traceroute

pccard modem | storage

site | version | web

logout terminates CLI session