Manualshelf

Owners manual

ManualsBrandsLantronix ManualsComputers & LaptopsSLC 8000 Advanced Console Manager, RJ45 32-Port, AC-Dual Supply - 2 x Network (RJ-45) - 2 x USB - 32 x Serial Port - G
181182183184185186187188189190
13: Maintenance
SLC™ Console Manager User Guide 190
Diagnostics Commands
The following CLI commands correspond to the Diagnostics page. For more information, see
Chapter 15: Command Reference .
diag arp (on page 227)
diag internals (on page 227)
diag netstat (on page 228)
diag nettrace (on page 228)
diag lookup (on page 227)
diag loopback (on page 227)
diag traceroute (on page 229)
diag ping | ping6 (on page 228)
diag perfstat (on page 228)
diag sendpacket host (on page 229)
Status/Reports
On the Status/Reports page, you can view the status of the SLC ports and power supplies and
generate a selection of reports.
Note: Status and statistics shown on the web interface represent a snapshot in time. To
see the most recent data, you must reload the web page.
1. Click the Maintenance tab and select the Status/Reports option. The top half of the page
displays the status of each port and the power supplies. Green indicates that the port
connection or power supply is active and functioning correctly. Red indicates an error or
failure. Figure 13-9 shows the page that displays.