Owners manual

13: Maintenance
SLC™ Console Manager User Guide 187
Diagnostics
The Diagnostics web page provides methods for diagnosing problems such as network
connectivity and device port input/output problems. You can use equivalent commands on the
command line interface. An additional diagnostic, loopback, is only available as a command.
1. Click the Maintenance tab and select the Diagnostics option. Figure 13-7 shows the page
that displays.
Figure 13-7 Diagnostics Page
2. Enter the following fields.
Select Diagnostics Select one or more diagnostic methods you want to run, or select All to run them
all.
ARP Table Address Resolution Protocol (ARP) table used to view the IP address-to-
hardware address mapping.
Netstat Displays network connections. If you select the checkbox, select a protocol or
select All for both protocols to control the output of the Netstat report.
Host Lookup If you enter a host name in the corresponding Hostname field, verifies that the
SLC device can resolve the host name into an IP address (if DNS is enabled).