Owners manual

SLC™ Console Manager User Guide 177
13: Maintenance
This chapter describes the tasks that the system administrator performs by using the pages of the
Maintenance tab and additional commands on the command line interface. It contains the
following sections:
 Firmware and Configurations
 System Logs
 Audit Log
 Email Log
 Diagnostics
 Status/Reports
 Events
 Banners
 LCD and Keypad
Note: The features and functionality described in this chapter specific to PC Card use
are supported on SLC-02 part numbers. The features and functionality specific to USB
port use are supported on SLC-03 part numbers.
Firmware and Configurations
The SLC device Firmware & Configurations page allows the system administrator to:
 Configure the FTP, SFTP, or TFTP server that will be used to provide firmware updates and
save/restore configurations. (TFTP is only used for firmware updates.)
 Set up the location or method that will be used to save or restore configurations (default, FTP,
SFTP, NFS, CIFS, USB port, or PC Card). Update the version of the firmware running on the
SLC console manager.
 Save a snapshot of all settings on the SLC device (save a configuration).
 Restore the configuration, either to a previously saved configuration, or to the factory defaults.
 For dual boot SLC console managers, view the firmware version on each boot bank, select the
bank to boot from, and copy the contents of one boot bank to the other.