Owners manual

12: User Authentication
SLC™ Console Manager User Guide 165
Users who are authenticated through Kerberos are granted device port access through the port
permissions on this page.
All Kerberos users are members of a group that has predefined user rights associated with it. You
can add additional user rights that are not defined by the group.
To configure the SLC console manager to use TACACS+ to authenticate users:
1. Click the TACACS+ tab and select TACACS+. Figure 12-9 shows the page that displays.
Figure 12-9 TACACS+ Page
2. Enter the following fields.
Enable TACACS+ Displays selected if you enabled this method on the User Authentication page. If
you want to set up this authentication method but not enable it immediately, clear
the checkbox.
You can enable TACACS+ here or on the first User Authentication page. If you
enable TACACS+ here, it automatically displays at the end of the order of
precedence on the User Authentication page.