Owners manual

12: User Authentication
SLC™ Console Manager User Guide 164
5. Click the Apply button.
Note: You must reboot the SLC device before your changes take effect.
Kerberos Commands
The following CLI commands correspond to the Kerberos page. For more information, see
Chapter 15: Command Reference .
 set kerberos (on page 234)
 show kerberos (on page 234)
TACACS+
Similar to RADIUS, the main function of TACACS+ is to perform authentication for remote access.
The SLC console manager supports the TACACS+ protocol (not the older TACACS or XTACACS
protocols).
The system administrator can configure the SLC unit to use TACACS+ to authenticate users
attempting to log in using the Web, Telnet, SSH, or the console port.
Services Right to enable and disable system logging, SSH and Telnet logins, SNMP, and
SMTP.
Secure Lantronix
Network
Right to view and manage secure IT management devices (e.g., SLP power
managers, Spider devices, SLC console managers) on the local subnet.
Date/Time Right to set the date and time.
Local Users Right to add or delete local users on the system.
Remote
Authentication
Right to assign a remote user to a user group and assign a set of rights to the user.
SSH Keys Right to set SSH keys for authenticating users.
User Menus Right to create a custom user menu for the CLI for Kerberos users.
Reboot &
Shutdown
Right to use the CLI or shut down the SLC device and then reboot it.
Firmware &
Configuration
Right to upgrade the firmware on the unit and save or restore a configuration (all
settings). Selecting this option automatically selects Reboot & Shutdown.
Diagnostics &
Reports
Right to obtain diagnostic information and reports about the unit.
SLC Network Right to view and manage SLC console managers on the local subnet.
Web Access Right to access Web-Manager.
Device Port
Configuration
Right to enter device port settings.
Device Port
Operations
Right to control device ports.
PC Card or USB Right to enter modem settings for PC Cards or the USB port.