Owners manual

12: User Authentication
SLCâ„¢ Console Manager User Guide 150
Figure 12-5 NIS Page
2. Enter the following fields.
Enable NIS Displays selected if you enabled this method on the Authentication Methods page.
If you want to set up this authentication method but not enable it immediately,
clear the checkbox.
Note: You can enable NIS here or on the first User Authentication page. If you
enable NIS here, it automatically displays at the end of the order of precedence on
the User Authentication page.
NIS Domain The NIS domain of the SLC console manager must be the same as the NIS
domain of the NIS server.
Broadcast for NIS
Server
If selected, the SLC device sends a broadcast datagram to find the NIS Server on
the local network.
NIS Master Server
(required)
The IP address or host name of the master server.