Owners manual

10: USB Port
SLC™ Console Manager User Guide 128
4. To configure the USB port, from the USB Ports table, click the radio button (on the far right)
for Port U1.
5. Click Configure. Figure 10-2 shows the page that displays.
Figure 10-2 USB - Storage Page
6. Enter the following fields.
Port
(view only)
Slot on the SLC console manager for the USB device.
Device
(view only)
Type of device (modem or storage).
Type
(view only)
Information read from USB device.
State
(view only)
Applies to USB device.
Mount Enables the first partition of the USB device (if not currently mounted). Once
mounted, a device is used for device port logging and for saving/restoring
configurations.
Unmount Enables ejecting the USB device.
Warning: If you eject a USB device from the SLC console manager
without unmounting it, subsequent mounts may fail, and you will need to
reboot the SLC device to restore the functionality.
Format Select to:
 Unmount the USB device (if it is mounted)
 Remove all existing partitions
 Create one partition
 Format it with the selected file system (ext2 or FAT)
 Mount the USB device
Filesystem Select ext2 or FAT, the file systems the SLC console manager supports.