Owners manual

8: Devices
SLC™ Console Manager User Guide 116
The following is the screen output:
Batch Script—SLC CLI
This script runs the following SLC CLI commands, then runs the Monport Interface script:
 show network port 1 host
 show deviceport names
 show script
 connect script monport deviceport 7
slb247glenn]> conn script ex4 deviceport 7
login: Logging in....
sysadmin
sysadmin
Password: PASS
Welcome to the SLC Console Manager
Model Number: SLC48
For a list of commands, type 'help'.
[slc251glenn]> show network port 1 host
show network port 1 host
___Current Hostname Settings___________________________________________________
Hostname: slc251glenn
Domain: support.int.lantronix.com
[slc251glen
Device HOSTNAME: SLC251GLENN
__________________________________________________________________________
Monitored Port: Port 7
Monitor Interval Time: 5 Seconds
[Current Time:21:16:43]
show portcounter deviceport 7
n]> show portcounter deviceport 7
Device Port: 7 Seconds since zeroed: 1453619
Bytes input: 0 Bytes output: 0
Framing errors: 0 Flow control errors: 0
Overrun errors: 0 Parity errors: 0
[slc251glenn]>
[Current Time:21:16:58]
show portcounter deviceport 7
show portcounter deviceport 7
Device Port: 7 Seconds since zeroed: 1453634
Bytes input: 0 Bytes output: 0
Framing errors: 0 Flow control errors: 0
Overrun errors: 0 Parity errors: 0
[slc251glenn]>
Port Counter Monitor Script Ending......
__________________________________________________________________________
Login Out.......
logout
Returning to command line
[slb247glenn]>