Manualshelf

Owners manual

ManualsBrandsLantronix ManualsComputers & LaptopsSLC 8000 Advanced Console Manager, RJ45 32-Port, AC-Dual Supply - 2 x Network (RJ-45) - 2 x USB - 32 x Serial Port - G
101102103104105106107108109110
8: Devices
SLC™ Console Manager User Guide 103
3. Click the Apply button.
Console Port Commands
The following CLI commands correspond to the Console Port page. For more information, see
Chapter 15: Command Reference.
set consoleport (on page 219)
show consoleport (on page 219)
Host Lists
A host list is a prioritized list of SSH, Telnet, and TCP hosts available for establishing incoming
modem connections or for the connect direct command on the CLI. The SLC console
manager cycles through the list until it successfully connects to one.
To add a host list:
1. Click the Devices tab and the Host Lists option. Figure 8-10 shows the page that displays.
Figure 8-10 Host Lists Page
2. Enter the following fields.
Show Lines on
Connecting
Click the checkbox if you connect to the console port with a terminal emulator. You
will see the last lines of output to the console. For example, the SLC boot messages
or the last lines of output during a CLI session on the console.