Owners manual

9: Administration
SGX 5150 IoT Device Gateway User Guide 98
SMTP
Table 9-30 SMTP Settings
To Configure SMTP Settings
Using Web Manager
 To configure SMTP protocol settings, on the Administration page, click SMTP in the menu.
Using the CLI
 To enter the command level: enable > config > smtp
Using XML
 Include in your file: <configgroup name=”smtp”>
SNMP Settings
Simple Network Management Protocol (SNMP) settings may be viewed and configured in this
section.
Table 9-31 SNMP Settings
SMTP Settings Description
From Address Enter the From Address here. This is an email address and is required. If you wish
to direct oubtound email messages through a mail server, put your client email
address here.
Server Address Enter the Server Address to direct outbound email messages through a mail
server.
Server Port Enter the SMTP server port number. The default is 25
Username Enter a Username to direct outbound email messages through a mail server.
Password Enter a Password to direct outbound email messages through a mail server.
Overriding Domain Enter the domain name to override the current domain name in EHLO (Extended
Hello).
SNMP Settings Description
State Select to enable or disable the SNMP agent state.
Version Select the SNMP version used by the SNMP agent.
Read Community Specify the read community used by the agent (defaults to public community).
Write Community Specify the write community used by the agent (defaults to private community).
System Contact Specify the system contact.
System Name Update the system name, as necessary. The default system name is .