Manualshelf

Owners manual

ManualsBrandsLantronix ManualsComputers & LaptopsSGX 5150 Wireless IoT Gateway, 802.11a/b/g/n/ac, 2xRS232 (RJ45), USB, 10/100 Ethernet, US Model - Twisted Pair - 1 x N
919293949596979899100
9: Administration
SGX 5150 IoT Device Gateway User Guide 94
To View and Configure Line Configuration and Command Mode
Note: The steps to view and configure Line 1 settings provided in this section are the
same for viewing and configuring Line 2.
Using Web Manager
To view line 1 statistics, on the Administration page, click Line > Line 1 > Statistics.
To configure line 1, on the Administration page, click Line > Line 1 > Configuration.
To configure line 1 command mode on the Administration page, click Line > Line 1 >
Command Mode.
Using the CLI
To enter the Line command level: enable > line <number>
Using XML
Include in your file: <configgroup name="line" instance=”1”>
USB
USB statistics can be viewed and USB settings and command mode may be configured on these
USB pages.
USB Statistics
This page displays the current status and various statistics for the USB Line.
To View USB Statistics
Using Web Manager
To view usb statistics, on the Administration page, click USB > Statistics.
Using the CLI
To enter the usb command level: enable > usb <number>
Using XML
Include in your file: <configgroup name="usb line" instance="3">
Signon Message Enter the string of bytes to be sent to the Serial Line during boot time. It may
contain a binary character(s) of the form [x]. For example, use decimal [12] or hex
[0xc]. Click the Submit button after entering the signon message.
Note: The Submit button will only appear if the Mode is not disabled.
Line Command Mode
Settings (continued)
Description