Owners manual

9: Administration
SGX 5150 IoT Device Gateway User Guide 82
Using XML
 Include in your file: <configgroup name="ftp server">
Gateway
The SGX 5150 IoT device gateway can be configured as a wireless router with DHCP server
functionality.
Status
This page displays the current configuration and statistics information for the gateway.
 To view gateway status: click Gateway on the menu and select Status.
WAN
Table 9-8 WAN Configuration
Gateway Settings Description
Operating Mode Select the type of operating mode:
 Disabled: prevents the device to be used as a gateway; use the device
normally.
 Gateway: allows the device to be used as a router with NAT.
 Router: allows the device to be used as a router without NAT.
Firewall Select to enable or disable firewall:
 Enabled: enables the device firewall.
 Disabled: disable the device firewall.
MAC Address filter Select to enable or disable the MAC address filter.
Interface Specify the WAN interface. Generally wlan0 interface.
IPv6 State Select to enable or disable the IPv6 state.
IP Address Assign a static IP address to the gateway.
IPv6 Address Assign a static IPv6 address to the gateway.
Primary DNS Enter the IP address of the primary Domain Name Server.
Note: This setting will be used when either Static IP or Auto IP is active, or
if DHCP/BOOTP is active and no DNS server was acquired from the
server.
Secondary DNS Enter the IP address of the secondary Domain Name Server.
Note: This setting will be used when either Static IP or Auto IP is active, or
if DHCP/BOOTP is active and no DNS server was acquired from the
server.