Owners manual

9: Administration
SGX 5150 IoT Device Gateway User Guide 81
To View, Configure and Send Email
Note: The following section describes the steps to view and configure Email 1 settings;
these steps apply to other emails available for the device.
Using Web Manager
 To view Email statistics, on the Administrations page, click Email > Statistics.
 To configure basic Email settings and send an email, on the Administrations page, click
Email > Configuration.
Using the CLI
 To enter Email command level: enable > email 1
Using XML
 Include in your file: <configgroup name=”email” instance=”1”>
FTP
The FTP protocol can be used to upload and download user files, and upgrade the SGX 5150
firmware. A configurable option is provided to enable or disable access via this protocol.
Table 9-7 FTP Settings
To Configure FTP Settings
Using Web Manager
 To configure FTP, on the Administration page, click FTP.
Using the CLI
 To enter the FTP command level: enable > config > ftp
Priority Select the priority level for the email alert:
 Urgent
 High
 Normal
 Low
 Very Low
FTP Settings Description
State Select to enable or disable the FTP server:
 Enabled (default)
 Disabled
Email – Configuration
Settings (continued)
Description