Owners manual

9: Administration
SGX 5150 IoT Device Gateway User Guide 79
To View and Configure Basic CLI Settings
Using Web Manager
 To view CLI statistics, on the Administration page, click CLI > Statistics.
 To configure basic CLI settings, on the Administration page, click CLI > Configuration.
Using the CLI
 To enter CLI command level: enable > config > cli
Using XML
 Include in your file: <configgroup name="cli">
Clock
You can view current clock settings at the bottom of the screen, and also either manually update or
synchronize the clock with an SNTP server. If you select SNTP, you can choose automatic time
zone detection.
Table 9-4 Clock Settings
To Specify a Clock-Setting Method
Using Web Manager
 To view or configure basic Clock settings, on the Administration page, click Clock.
Using the CLI
 To enter Clock command level: enable > config > clock
Using XML
 Include in your file: <configgroup name="clock">
Bridge Fields Description
Method Select Manual or SNTP from the drop-down window.
Date If Manual method is selected, enter the date using the Year, Month and
Day drop down menus that become available.
Time If Manual method is selected, enter the time using the Hour, Minute (Min)
and Second (Sec) drop down menus that become available.
NTP Server If SNTP method is selected, the clock will keep time synchronized with the
NTP Server by default. Enter an alternative NTP server if you wish to use an
address other than the default.
Time Zone Select the desired Time Zone from the drop-down menu based on geographic
location. The time zones listed are in Universal Time Coordinated (UTC),
formerly known as Greenwich Mean Time (GMT). Syslog and other
applications may use UTC. The UTC Offset of the form HHMM (H = hour, M =
minute) is applied to the UTC time to get the local time. The device will make
seasonal time changes required for Daylight Savings Time.