Owners manual

6: Network Settings
SGX 5150 IoT Device Gateway User Guide 66
Credentials After EAP-TLS is selected and the Validate Certificate is enabled, either:
 Select the credential, if listed in the drop-down menu, to validate.
 Type the name of the credential if the credential is not listed in the drop-
down menu.
Username Enter a username.
Password Enter a password if the LEAP, EAP-TTLS and PEAP option is chosen. Check
the Show Password check box to make the password viewable as you enter
it in the Password field.
Inner Credentials Provide inner credentials with enterprise authentication when PEAP/TLS is
selected. Inner credentials specify the client certificate required for the TLS
inner authentication.
Note: This option is available when the WPA2/WPA mixed mode suite, the
IEEE 802.1x authentication, PEAP and PEAP EAP-TLS settings are
selected.
Apply (button) Click this button after making configuration selections above, to apply but not
submit/save your choices.
Test Connection (button) Click this button to test the connection according to the configuration
selections made above, but not to submit/save your choices.
Submit (button) Click this button to submit and save your configuration choices.
WLAN Profile Settings Description