Owners manual

6: Network Settings
SGX 5150 IoT Device Gateway User Guide 65
Passphrase If Passphrase key type is selected, enter an alphanumeric phrase up to 63
characters in length in this field which becomes available. Spaces and
special characters are allowed. Check Show Password to show the
passphrase entered.
TX Key Index If WEP security suite and Hex key type have been selected, then select the
TX key index from the drop-down menu, which becomes available.
 For interoperability with some products that generate four identical keys
from a passphrase, this index must be one.
 For Keys 1-4, enter one or more encryption keys in hexadecimal format.
Enter 10 hexadecimal digits (0-9, a-f) for WEP40 and 26 for WEP104. For
security reasons, the configured keys are not shown.
IEEE 802.1X If IEEE 802.1X authentication is selected, choose a particular type:
 LEAP: type a User Name and Password, then select an Encryption.
 EAP-TLS: Type a Username.
 EAP-TTLS
 PEAP: For PEAP Option, select a security protocol.
 FAST: If selected, select the Fast Option and Fast Provisioning options.
FAST Option Select the FAST option from the drop-down menu:
 MD5 (default)
 MSCHAPV2
 GTC
Note: This option is available when the WPA2/WPA mixed mode suite and
the IEEE 802.1x authentication settings are selected.
FAST Provisioning Select the FAST provisioning option from the drop-down menu:
 Unauthenticated
 Authenticated (default)
 Both
Note: This option is available when the WPA2/WPA mixed mode suite, the
FAST IEEE 802.1x authentication, and the MSCHAPV2 FAST option are
selected.
EAP-TTLS Option Select a security protocol:
 EAP-MSCHAPV2
 MSCHAPV2
 MSCHAP
 CHAP
 PAP
 EAP-MD5
Note: This option is available when the WPA2/WPA mixed mode suite, the
IEEE 802.1x authentication, and EAP-TTLS settings are selected.
PEAP Option Select EAP-MSCHAPV2, EAP-MD5 or EAP-TLS.
Note: This option is available when the WPA2/WPA mixed mode suite, the
IEEE 802.1x authentication, and PEAP settings are selected.
Validate Certificate If EAP-TLS is selected, validate the certificate installed on the device by
selecting Enabled in the Validate Certificate field which appears. Validates
the certificate installed on the device with the one received from the RADIUS
server.
WLAN Profile Settings Description