Owners manual

6: Network Settings
SGX 5150 IoT Device Gateway User Guide 50
To View or Configure Wireless Network Interface Settings
Using Web Manager
 To view the wireless (wlan0) network interface status, on the Network page, then select
Wireless Network > Interface.
 To configure wireless (wlan0) network interface settings, on the Network page, select
Wireless Network > Interface > Configuration.
Using the CLI
 To enter the command level: enable > config > if 2
Using XML
 Include in your file: <configgroup name= “interface" instance="wlan0">
Wireless (wlan0) Network Link
Configuration details are stored in one or more WLAN profile. See WLAN Profiles (on page 63) to
view and configure WLAN profiles. You can select and prioritize up to four preconfigured WLAN
profiles for automatic connection to wireless networks. Dynamic profiles, created via quick
connect/WPS, have a higher priority over a static profile. Listed dynamic and static profiles can be
prioritized with 1 being highest priority through 4 being lowest priority.
Table 6-8 displays the wireless link status and configuration information. The view-only status
information is available on the Wireless (wlan0) Network WLAN Link Status page. This same
information is configurable on the Wireless (wlan0) Network WLAN Link Configuration page.
Table 6-8 Wireless (wlan0) Link Configuration
IP v6 Default Gateway Enter the default IPv6 default gateway.
IPv6 Domain Enter the domain name suffix for the interface.
Note: This setting will be used when either Static IP or Auto IP is active, or if
DHCP/BOOTP is active and no Domain Suffix was acquired from the server.
IPv6 Primary DNS Enter the IP address of the primary Domain Name Server.
Note: This setting will be used when either Static IP or Auto IP is active, or if
DHCP/BOOTP is active and no DNS server was acquired from the server.
IPv6 Secondary DNS Enter the IP address of the secondary Domain Name Server.
Note: This setting will be used when either Static IP or Auto IP is active, or if
DHCP/BOOTP is active and no DNS server was acquired from the server.
Field/Button Description
Choice 1 Profile
Choice 2 Profile
Choice 3 Profile
Choice 4 Profile
Enter up to four (4)WLAN Profiles (on page 63) for automatic connection to
wireless networks in order of priority, with Choice 1 Profile being highest priority
through Choice 4 Profile being lowest priority. If a profile in the choice list is
deleted, that profile is skipped in the connection attempt.
Antenna Diversity Enable antenna diversity or select a specific antenna for use.
Debugging Level Set the verbosity level for printing WLAN Link messages to the TLOG (Default is
Info).
Field/Button Description