Owners manual

ManualsBrandsLantronix ManualsComputers & LaptopsSGX 5150 Wireless IoT Gateway, 802.11a/b/g/n/ac, 2xRS232 (RJ45), USB, 10/100 Ethernet, US Model - Twisted Pair - 1 x N

120

121

122

123

124

125

126

127

128

129

9: Administration

SGX 5150 IoT Device Gateway User Guide 124

Table 9-49 Configuration from Filesystem

Table 9-50 Line(s) from single line Settings on the Filesystem

Quick Setup

Quick Setup provides a place to configure all basic settings in one place. You may access Quick

Setup through the Administration menu or whenever you reset your system to factory defaults.

Note: The SGX 5150 IoT Device Gateway Quick Start Guide provides for instructions on

accessing Web Manager via SoftAP (go to www.lantronix.com/support/documentation

To Utilize Quick Setup

Using Web Manager

1. In the Web Manager, click the Administration tab.

2. Click Quick Setup.

3. Click OK in the verification window which appears.

4. Update the Quick Setup information below:

Setting Description

Filename Enter the name of the file on the SGX 5150 unit (local to its filesystem) that

contains XCR data.

Lines to Import Select filter instances to be imported in the line, serial, tunnel and terminal

groups. This affects both Whole Groups to Import and Text List selections.

Click Clear All to clear all checkmarks, or Select All to check all

checkmarks.

Groups to Import Select the configuration groups to import from the XML configuration

record. This option imports all instances of each selected group. Click

Clear All to clear all checkmarks, or Select All but Networking to check

all checkmarks except Networking.

Text List Enter the string to import specific instances of a group. The textual format

of this string is: <g>:<i>;<g>:<i>;...

Each group name <g> is followed by a colon and the instance value <i>

and each <g>:<i> value is separated by a semi-colon. If a group has no

instance then only the group name <g> should be specified.