User guide

9: Services
SecureLinx Spider/SpiderDuo User Guide 87
Figure 9-14 SNMP Settings Page
2. Modify the following fields.
Table 9-15 SNMP Settings
Field Description
Enable SNMP Agent Click the checkbox to enable the Spider SNMP agent, and enter the system
location and the contact name for the system.
Use SNMPv3 Select to use SNMPv3 (rather than SNMPv1)and enter the following:
 DES Encryption: Select whether to turn off or enable encryption with
Data Encryption Standard (DES),
 Read Username: User ID for a user with read-only authority to use to
access SNMP v3.
 Read Password: Password for a user with read-only authority to use
to access SNMP v3. Up to 32 characters.
 Write Username: Enter a user ID for users with read-write authority.
Up to 32 characters.
 Write Password: Enter a password for the user with read-write
authority to use to access SNMP v3. Up to 20 characters.
Use SNMPv1 Select to use SNMPv1 (rather than SNMPv3) and enter the following:
 Read Community: Enter the SNMP read community name. The
default is public.
 Write Community: Enter the SNMP write community name. The
default is private.