User guide

9: Services
SecureLinx Spider/SpiderDuo User Guide 86
Event Log Assignments
3. Do one of the following:
a. Click Save to save settings.
b. Click Reset to Defaults to restore system defaults.
c. Click Reset to restore original settings.
SNMP
The Spider has an internal SNMP agent that has various objects accessible in its MIB. It also can
generate traps based on events. The Spider permits enabling or disabling the SNMP agent, input
read and write communities, location information, contact information, and viewing the MIB.
To configure SNMP settings, perform the following steps.
1. Click Services > SNMP. The SNMP Settings page displays.
SMTP Logging enabled With this option, the Spider is able to send emails to an address given by the
email address. These emails contain the same description strings as the
internal log file and the mail subject contains the event class. To use this log
destination, specify an SMTP Server, the Receiver Email Address, and
Sender Email Address. Enter the mail server and SMTP port as
<serverip>:<port>.
SNMP Logging Enabled If selected, the Spider sends an SNMP trap to a specified destination IP
address every time a log event occurs. Configure the Destination IP and
Community. View the SNMP MIB implemented in the Spider by clicking on
the Spider SNMP MIB link.
Table 9-13 Event Log Assignments
Field Description
Event Log Assignments Select the event classes for monitoring, local logging, and exportation.
Table 9-12 Event Log Targets
Field Description