User guide

7: Interfaces
SecureLinx Spider/SpiderDuo User Guide 63
Mouse Speed
3. View the USB Status for USB Speed, Keyboard, Mouse, and Mass Storage.
4. Do one of the following:
a. Click Save to save settings.
b. Click Reset to Defaults to restore system defaults.
c. Click Reset to restore original settings.
To configure the Spider USB model with a Sun Solaris operating system, perform the following
steps.
1. Click Interfaces > Keyboard/Mouse. The Keyboard/Mouse Settings page displays.
2. On the Keyboard/Mouse Settings page configure the red outlined fields as shown.
3. The Sun Solaris operating system requires the keyboard to send a country code to use a
certain language. At Country Code click enabled and use the Country drop- down list to
select your language choice.
Note: Sun Solaris settings are for the Spider only.
4. Click Save.
Table 7-22 Mouse Speed
Field Description
Mouse speed Select the method of assigning mouse speed.
 Auto mouse speed determines the speed and acceleration settings of
the target system. It is the recommended setting for most applications.
 Fixed scaling translates a one-pixel motion on the client system to a
selectable number of pixels moved on the target system. As the 1 to n
mapping is linear, this will only work when there is no compression
acceleration or other special effects turned on at the target system.