User guide

7: Interfaces
SecureLinx Spider/SpiderDuo User Guide 56
3. Do one of the following:
a. Click Save to save settings.
b. Click Reset to Defaults to restore system defaults.
c. Click Reset to restore original settings.
Serial Port Settings
After using the serial port to set up the network parameters, you can use the serial port for
something else. You can establish a PPP connection to use a modem (Spider only) or another
serial connection to log into and operate the Spider. If you want to access a console port remotely
through the Spider, SSH and Telnet passthrough is available.
To configure the serial port, perform the following steps.
1. Click Interfaces > Serial Port. The Serial Port Settings page displays.
Figure 7-6 SpiderDuo Serial Port Settings Page
2. Modify the following fields.
Proxy host Enter the proxy server's address.
Proxy port Enter the proxy port number.
Table 7-7 Serial Port Settings
Field Description
Configuration Login Select this option to use the serial port locally only to set up network
parameters or reset the unit.
Table 7-5 Miscellaneous Network Settings (continued)
Field Description