User guide

7: Interfaces
SecureLinx Spider/SpiderDuo User Guide 54
Figure 7-1 Spider Network Settings Web Page
2. Modify the following fields.
Network Basic Settings
Table 7-2 Network Basic Settings
Field Description
IP auto configuration Select DHCP or BOOTP to fetch network settings from the appropriate type
of server. Select NONE for a fixed IP address.
Host name DHCP servers can register a name for this Spider to assist in finding it, or
you can configure it with a short host name or a fully qualified domain
name.
IP address If you are using a fixed IP address, enter it in the usual dot notation.
Subnet Mask If you are using a fixed IP address, enter the subnet mask of the local
network.
Gateway IP address
(optional)
If the Spider is to be accessible from outside the local subnet, enter the IP
address of the router providing access.
Primary DNS Server IP
Address (optional)
For name resolution, enter the IP address of the primary Domain Name
Server. This is optional, but needed if names rather than static IP addresses
are used for certain Spider functions requiring network connections.