User guide

4: Installing the SpiderDuo
SecureLinx Spider/SpiderDuo User Guide 37
Figure 4-7 Detector Device List Window
7. Click to highlight the device that you want and click the Network Settings icon to change
the IP address. The Enter Network Settings window displays the Device Type and MAC
Address (Ethernet address) that identify the device as shown in Figure 4-8.
Figure 4-8 Network Settings Window
8. Enter an unique and valid IP Address on your network and in the same subnet as your PC.
There is no default.
9. Enter the subnet mask that is the network segment connected to the Spider. To accept the
default, leave blank.