User guide

9: Firmware Upgrades
SDS1101/2101 User Guide 68
2. From the Tools menu, select Advanced/Recover Firmware. The Serial Port
Firmware Upgrade window displays.
3. For Port on PC, enter the COM port on the PC that is connected to the serial
port of the Lantronix unit.
4. For Device Model, be sure the appropriate device (e.g. SDS1101)
displays.
5. For Firmware File, click the Browse button and go to the location where the
firmware file resides.
Note: Make sure the SDS1101/2101 on which you are recovering firmware is
connected to this selected port on your PC.
6. Click OK to download the file.
7. When prompted, reset the device. Status messages and a progress bar at the
bottom of the screen show the progress of the file transfer. When the file transfer
completes, the message “Successful, Click OK to Close” displays.
8. Click the OK button to complete this procedure.