User guide

4: Configuration Using Web-Manager
SDS1101/2101 User Guide 37
Remote Port
Enter the port number of the remote device.
Remote Host
Enter the IP address of the remote device.
Use Broadcast
Select to broadcast the UDP datagram. Datagrams of type 01
can be sent as a broadcast by enabling this option. The
default is not to broadcast.
Note: Datagrams are sent as subnet-directed broadcasts.
Device Address Table
The table is enabled when Datagram Type is set to FD. Enter
values between 1 and 255 to identify units on the local
network of device servers.
Note: Lantronix Tech Support supports Datagram type 01.
Datagram Type FD is for OEM use.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Apply Settings
1. To save and apply the configuration changes to the device server, click the
Apply Settings button.
Note: Clicking OK on each page does not change the configuration on the device.
OK tells the SDS what changes to use; Apply Settings makes the changes
permanent and reboots the SDS.
Apply Factory Defaults
1. Click the Apply Defaults button to set the device server back to the default
settings. For details see Default Settings (Option 7).
2. Click Yes to set factory settings, or click No to cancel.