User guide

4: Configuration Using Web-Manager
SDS1101/2101 User Guide 29
Figure 4-4. Hostlist Settings
2. Enter or modify the following fields:
Retry Settings
Retry Counter Enter the value for the number of times the SDS should
attempt to retry connecting to the host list. The default setting
is 3.
Retry Timeout Enter the duration (in seconds) the SDS should abandon
attempting a connection to the host list. The default setting is
250.
Host Information
Host Address
Enter or modify the host’s IP address.
Port Enter the target port number.
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Channel 1 & Channel 2 (SDS2101 only) Configuration
The Channel configuration defines how the serial port responds to network and serial
communication.
Serial Settings
To configure the channel’s serial settings: