User guide

3: Getting Started
SDS1101/2101 User Guide 20
Device Family
Non-configurable field. Displays the SDS1101’s and
SDS2101’s device family type as SDS.
Type Non-configurable field. Displays the device type as SDS1101
or SDS2101.
ID
Non-configurable field. Displays the SDS’s ID embedded
within the box.
Hardware Address
Non-configurable field. Displays the SDS’s hardware (or MAC)
address.
Firmware Version
Non-configurable field. Displays the firmware currently
installed on the SDS.
Extended Firmware
Version
Non-configurable field. Displays the full version nomenclature
of the firmware.
Online Status Non-configurable field. Displays the SDS status as online,
offline, unreachable (the SDS is on a different subnet), or busy
(the SDS is currently performing a task).
IP Address Non-configurable field. Displays the SDS’s current IP address.
To change the IP address, see Assigning an IP Address
IP Address was obtained
Statically
Subnet Mask Non-configurable field. Displays the SDS’s current subnet
mask. To change the subnet mask, see Assigning an IP
Address.
Gateway Non-configurable field. Displays the SDS’s current gateway.
To change the gateway, see Assigning an IP Address.
Number of COB partitions
supported
Non-configurable field. Displays the number of COB partitions
supported.
Number of Ports
Non-configurable field. Displays the number of ports on the
SDS.
TCP Keepalive
Non-configurable field. Displays the SDS’s TCP keepalive
value. The value is in the range 1-65s, and the default setting
is 45.
Telnet Enabled
Non-configurable field. Permits Telnet sessions.
Telnet Port Non-configurable field. Displays the SDS port for telnet
sessions.
Web Enabled
Non-configurable field. Permits configuration through Web-
Manager.
Web Port
Non-configurable field. Displays the SDS port for Web-
Manager configuration.
Maximum Baud Rate
Supported
Non-configurable field. Displays the SDS’s maximum baud
rate. Note: The SDS1101/2101 may not currently be running
at this rate.
Firmware Upgradeable
Non-configurable field. Displays True, indicating the SDS’s
firmware is upgradeable as newer version become available.
Supports Configurable
Pins
Non-configurable field. Displays False.