User Manual

Supported RADIUS Attributes Accounting Attributes
D-4
If Login-Service is Rlogin and the Login-IP-Host value is not set, the SCS makes an Rlogin connection to
the preferred Telnet host.
D.2 Accounting Attributes
For all Accounting packets, the SCS transmits Acct-Status-Type (On, Off, Start, or Stop) and the SCSs
NAS-Identifier. For individual Accounting-Start and Accounting-Stop packets, the SCS can also transmit
the attributes listed in Table C-2.
Note: Items marked with * are only sent when the Service-Type value is Framed or
Callback-Framed.
D.3 Examples
The following examples can be used as templates for the public domain Merit RADIUS server available via
anonymous FTP at ftp.merit.edu. The examples will also work with the public domain Livingston
RADIUS server available via anonymous FTP at ftp.livingston.com.
Table D-2: Accounting Packet Attributes
Accounting-Start Accounting-Stop
Acct-Session-ID Acct-Session-ID
Acct-Delay-Time Acct-Delay-Time
User-Name User-Name
NAS-Identier NAS-Identier
NAS-Port NAS-Port
NAS-Port-Type Class
Calling-Station-ID Acct-Input-Octets
Class Acct-Output-Octets
Service-Type Acct-Input-Packets*
Framed-Protocol* Acct-Output-Packets*
Framed-IP-Address* Acct-Session-Time
Framed-Routing* Acct-Terminate-Cause (if known)
Filter-ID*
Framed-MTU*
Framed-Compression*
Idle-Timeout
Session-Timeout