User Manual
Supported RADIUS Attributes Access-Accept
D-2
Framed A PPP or SLIP connection is started.
Callback-Login The user is disconnected and called back, then connected to a host.
Callback-Framed The user is disconnected and called back, then begins a PPP or SLIP mode
connection.
Prompt The user is provided with a command line prompt on the SCS from which it is
possible to enter privileged commands.
Note: See RADIUS on page 11-13 for the differences between the login and prompt
service types and how they are handled by the SCS.
Table C-1 shows the additional attributes that can be used in Access-Accept packets sent by the RADIUS
server. Items marked with plus signs (+) are only valid when the Service-Type is Login or Callback-Login.
Items marked with asterisks (*) are only valid when the Service-Type is Framed or Callback-Framed.
Table D-1: Access-Accept Attributes
Attribute Supported Values (if any)
Framed-Protocol* PPP
SLIP
Framed-IP-Address* See Framed-IP-Address on page D-3
Framed-Routing* Send
Listen
Send & Listen
None
Filter-ID* See Filter-ID, page -3
Framed-MTU*
Framed-Compression* None
Van-Jacobson TCP/IP Header Compression
Login-IP-Host+ See Login-IP-Host on page D-3
Login-Service+ Telnet
Rlogin
TCP-Clear (raw TCP connection)
Login-TCP-Port+
Reply-Message
Session-Timeout
Idle-Timeout
Framed-AppleTalk-Link*
Framed-AppleTalk-
Network*