User Manual

Command Reference Security Commands
12-163
prec_num
A precedence number between 1and 6.
Encryption
SecurID (SID) or DES encryption will be used for authentication.
SID
Enables use of SecurID encryption.
DES
Enables use of DES encryption.
Maxtries
Specifies the maximum number of times the SCS will attempt to contact the
SecurID server. Must be used in conjunction with the tries parameter.
tries
An integer between 1 and 255, inclusive.
Port
Specifies the UDP/IP port number used to communicate with the primary and
secondary SecurID servers. Must be used in conjunction with the PortNum
parameter.
PortNum
An integer between 1 and 65535.
Timeout
Specifies the timeout period for a response from the SecurID server. Must be
used in conjunction with the seconds parameter.
seconds
An integer between 1 and 255, inclusive.
Defaults Encryption: DES
Maxtries: 5
UDP/IP port: 5500
Timeout: 3 seconds
Examples
Local>> DEFINE AUTHENTICATION SECURID PRIMARY 192.0.1.55
Local>> DEFINE AUTHENTICATION SECURID TIMEOUT 10 MAXTRIES 4
Local>> DEFINE AUTHENTICATION SECURID ACCOUNTING ENABLED
See Also Define Site Authentication, page 12-134; SecurID, page 11-16