User Manual

Command Reference Security Commands
12-162
12.11.9 Set/Define Authentication SecurID
Specifies that a Security Dynamics ACE/SecurID server will be used for authentication.
Restrictions Requires privileged user status.
Parameters Primary
Specifies the first database or server to be checked. A specific address may be
set with the address parameter, or the None parameter may be used to indicate
that the database or file will not be used.
Secondary
If the SCS fails to authenticate the user using the primary database or server
(due to network failure, server failure, missing or incorrect username/
password), the secondary database or server will be checked. A specific
address may be set with the address parameter, or the None parameter may be
used to indicate that the server will not be used.
If the user cannot be authenticated using the secondary database or server, the
database or server with the next precedence level will be checked. If all
precedence levels fail to authenticate the user, the user is prevented from
logging in.
address
A text host name (if a DNS is available for name resolution) or an IP address
in standard numeric format (for example, 192.23.71.49).
None
Clears the current server address.
Precedence
Sets the precedence in which this database or server is checked. The
precedence number must be specified using the prec_num parameter.
SET
DEFINE



AUTHENTICATION SECURID
PRIMARY
address
NONE



SECONDARY
address
NONE



PRECEDENCE prec_num
ENCRYPTION
SID
DES



MAXTRIES tries
PORT PortNum
TIMEOUT num




















