User Manual

Command Reference Security Commands
12-155
Parameters All
Removes all SNMP table entries.
CommunityName
Enter the name of the SNMP community to be removed.
Examples
Local>> CLEAR SNMP “nycomm”
See Also Set/Define SNMP, page 12-178; Set/Define Filter IP, page 12-171; Show/
Monitor/List SNMP, page 12-180; Appendix C, SNMP Support
12.11.5 Set/Define Authentication
Configures the authentication system. Logins on ports with authentication enabled will be prompted for a
username and password pair, which will be checked sequentially against up to six databases: a Kerberos
database, the SCS local database (NVR), a RADIUS server, a SecurID server, or a UNIX password file
(TFTP).
To configure one or more of the six databases, refer to the appropriate command in this section.
Note: Precedence settings should be configured carefully. If a database is configured
for a precedence slot that has already been filled by another database, it will take
over the precedence setting and return all of the previous database’s settings to
their factory defaults.
Restrictions Requires privileged user status.
See Also Define Site Authentication, page 12-134; Chapter 11, Security
SET
DEFINE



AUTHENTICATION
KERBEROS options{}
LOCAL options{}
RADIUS options{}
SECURID options{}
TFTP options{}
UNIQUE options{}
USER options{}










