User Manual

Command Reference Site Commands
12-147
Restrictions Requires privileged user status.
Parameters SiteName
Enter a site name of up to 12 characters.
PPP
PPP will be used for outgoing calls.
SLIP
SLIP will be used for outgoing calls.
Defaults PPP.
See Also Incoming Connections, page 4-9
12.10.12 Define Site Telephone
Defines the telephone number of the remote site. Before you assign a telephone number, you must associate
the site with an SCS port or ports.
Restrictions Requires privileged user status.
Errors An error is returned if there is no port associated with the site.
Parameters SiteName
Enter a site name of up to 12 characters.
number
A telephone “number” of up to 24 characters. Characters of any type can be
used.
None
No telephone number will be defined for this site.
Default
None (no telephone number is defined).
Examples
Local>> DEFINE SITE irvine TELEPHONE [phone]
See Also Define Site Port Telephone, page 12-145; Assign a Telephone Number to the
Port or Site, page 4-17
DEFINE SITE SiteNameTELEPHONE
number
NONE


