User Manual

Command Reference Site Commands
12-145
Default
1522 bytes.
Examples
Local>> DEFINE SITE irvine MTU 256
See Also Set/Define IP All/Ethernet MTU, page 12-32; Chapter 4, Basic Remote
Networking
12.10.9 Define Site Permanent
Configures a permanently connected site. When enabled, the site connects immediately after the SCS boots.
If the connection is interrupted and the site goes down, the site will reconnect as soon as it is able.
Restrictions Requires privileged user status.
Parameters Enabled
Enables the specified site to be permanently connected.
Disabled
Disables a permanent connection for a site.
Examples
Local>> DEFINE SITE irvine PERMANENT ENABLED
12.10.10 Define Site Port
Configures a port that a site will use for its outgoing calls. Each port must have a telephone number
associated with it. If multiple ports are associated with a site, they must be prioritized.
Note: To purge the port setting from the site, see Purge Site, page 12-150.
Restrictions Requires privileged user status.
Parameters SiteName
A site name of up to 12 characters.
PortList/All
Specifies a particular SCS port, a list or range of ports, or all ports. Port
numbers should be separated with commas (for lists) or dashes (for ranges).
DEFINE SITE SiteName PERMANENT
ENABLED
DISABLED



DEFINE SITE SiteName PORT
PortList
ALL



BANDWIDTH BytesPerSecond
TELEPHONE
number
NONE



PRIORITY priorityNum