User Manual

Command Reference Site Commands
12-144
Update
Configures the time, in seconds, between sending a RIP packet. Must be used
in conjunction with the time parameter.
time
An integer between 10 and 255 representing the number of seconds between
updates.
Slots
Configures the number of header compression slots. Must be used in
conjunction with the SlotNum parameter.
SlotNum
An integer between 1 and 254.
Defaults IP, Compress, and RIP: Enabled
Address, Netmask, and RemoteAddress: None
Default: Disabled
RIP Metric: 1
RIP Updates: every 30 seconds
Header compression slots: 16
Examples
Local>> DEFINE SITE irvine IP SLOTS 16
Local>> DEFINE SITE irvine IP RIP UPDATE 30
Local>> DEFINE SITE irvine IP UNNUMBERED
Local>> DEFINE SITE irvine IP RIP METRIC 4
Local>> DEFINE SITE irvine IP COMPRESS ENABLED
Local>> DEFINE SITE irvine IP FORWARD ENABLED
See Also Set/Define Logging Sites, page 12-174; Show/Monitor/List Sites, page 12-
151; Configuring RIP for Sites, page 4-8
12.10.8 Define Site MTU
Configures the maximum sized packet that the remote site may send to the SCS. Packets larger than this
will be fragmented by the remote site.
Restrictions Requires privileged user status.
Parameters SiteName
A site name of up to 12 characters.
MaxSize
Between 32 and 1522 bytes, inclusive.
Note: The SCS will negotiate MTU with the remote site, so the actual MTU may be
lower than what is configured.
DEFINE SITE SiteName MTU MaxSize