User Manual

Command Reference Server Commands
12-132
Timezone
Displays the timezone if a timezone has been specified.
Examples
Local> SHOW SERVER BOOTPARAMS
See Also Set/Define Server Clock, page 12-119; Setting the Date and Time, page 2-9
12.9.30 Show/Monitor/List Timezone
Displays a table of timezone abbreviations which can be used to select a timezone for the server.
Restrictions You must be the privileged user to use the Monitor command.
See Also Setting the Date and Time, page 2-9
12.9.31 Show/Monitor Users
Displays the current users logged onto the server. For each user, the SCS displays the port username and
current connection information.
Restrictions You must be the privileged user to use the Monitor command.
Errors List Users will cause an error.
5 FIFO underrun: Ethernet controller
could not access transmit data in
time to send it out
Received a packet larger than the
maximum Ethernet size (1536
bytes)
6 CD heartbeat not received after
transmission
Unused, should be 0
7 Out-of-window collision detected
8-15 Unused, should be 0
Table 12-5: Server Failure Reasons
Bit Send Failure Reason Receive Failure Reason
SHOW
MONITOR
LIST





TIMEZONE
SHOW
MONITOR



USERS