User Manual

Command Reference Server Commands
12-130
time
The time difference from Greenwich Mean Time, entered as h:mm. Entering
the minutes is optional.
ChangeTime
Enter the month, day, and time of day that the change to DST occurs,
separating each element by a space (see the examples below). For the month,
enter the first three letters of the month. For the day, recognized forms include:
For the time of day, use the same format as used for the time parameter.
RevertTime
Enter the month, day, and time of day
None
Specifies that no timezone will be used.
Examples
Local>> DEFINE SERVER TIMEZONE AMERICA/EASTERN
Local>> DEFINE SERVER TIMEZONE HST -10
Local>> DEFINE SERVER TIMEZONE MET 1:00 MET-DST 1:00 Mar lastSun 2:00
Sep lastSun 2:00
(In the last example above, MET is the STDzone, and MET-DST is the
DSTzone, both of which are one hour off of Greenwich Mean Time. The
change to DST occurs on the last Sunday in March at 2:00, and it
reverts back to standard time on the last Sunday in September at 2:00.)
See Also Set/Define Server Clock, page 12-119; Show/Monitor/List Timezone, page
12-132
12.9.28 Show/Monitor/List Menu
Displays the current or saved Menu entries. If you have a configuration file set, this command will only
display the name of that file.
Restrictions You must be the privileged user to use the Monitor command.
Secure users may not use this command.
5 The fifth day of the month
lastSun The last Sunday in the month
Sun>=8 The first Sunday on or after the 8th of the month
Sun<=25 The last Sunday on or before the 25th of the month
SHOW
MONITOR
LIST





MENU