User Manual
Command Reference Server Commands
12-126
Examples (shown with the prompt that might result on the next line)
Local>> SET SERVER PROMPT “Port %n:”
Port 3: SET SERVER PROMPT “%D:%S!”
SCS1600:LabServ! SET SERVER PROMPT “%p%S_%n%P%%”
Port_5[NoSession]_5>% SET SERVER PROMPT “Lcl_%n>%P”
Lcl_3>>
See Also Changing the Local Prompt, page 2-8
12.9.20 Set/Define Server RARP
Enables or disables querying for a RARP host at system boot time.
Restrictions Requires privileged user status.
Defaults Enabled
See Also Your Installation Guide
12.9.21 Set/Define Server Retransmit Limit
Specifies the number of times that a TCP packet will be resent if it is not acknowledged.
Restrictions Requires privileged user status.
Parameters LimitNum
An integer between 4 and 100, inclusive.
Defaults 50 tries
SET
DEFINE
SERVER RARP
ENABLED
DISABLED
SET
DEFINE
SERVER RETRANSMIT
LIMIT
LimitNum